How to clean gold earrings with stones using available products

The unique properties of stones have been tested over the years. They help improve physical condition, attract good luck, make people happy, help create prosperous families, where peace, comfort, virtue always reign and the joyful laughter of lovely children can be heard. In general, stones constantly “work”, sparing no effort, especially positive energy. It is the last factor that is the cause of all the positive results that a person feels when he carries a talisman or amulet with him. But, like any other force, positive energy can leave a mineral over time. And in order to restore its unique abilities, you need to take care of your amulet, cleansing it of negative energy.

Accumulation of energy by stones

It is worth keeping in mind that you will never be able to experience the pristine purity of the stone you have become the owner of. If it was inherited, it passed through the hands of many generations. If you independently purchased jewelry in a store, then strangers took part in its creation, and the mineral became the owner of someone else’s information, and not always positive. Only a found gem can boast of natural purity. But such cases are isolated.

Most often, noble stones are objects of energy accumulation. Those minerals that are intended to be used for medicinal purposes must undergo complete purification. This is especially true for crystals that came to a new owner from deceased relatives or friends. Onyx is considered to be the most dangerous unrefined stone. As for citrine, it is enough for it to have proper and constant care or simply undergo regular cleaning with regularity.

Stones can be treated differently. You can love them and hate them, sometimes there is a cold attitude. But you need to remember one simple truth. If you want to have constant protection, an assistant, an adviser, then you need to find not only a common language with the stone, but also find inner harmony. There are several rules to follow:

1. Don’t think that the mineral will begin to work wonders the next day after it appears. In order for you to perceive his help, you need to get used to each other, complete mutual understanding. This is achieved after a certain period of time.
2. To obtain a positive effect in the future, it is necessary to clean the newly acquired stone. Why cleanse? Because during their existence on Earth, minerals absorb all the energy that is in close proximity to them. This could be the energy of the Sun, Moon, the planet itself, people who have been in contact with gems, and so on. To get rid of energy and information traces, it is necessary to clean them.
3. Once the cleaning is completed, the stone should be left to rest for a couple of weeks. During this time he rests and gains strength. The next step is charging it. The methods can be different: the light of the Moon or the Sun, herbs, salt, and so on.
4. You need to respect and love your talisman. This has a positive effect on his qualities. All gems need to be monitored, cared for, and regularly cleaned, the regularity of which depends on how you use your amulet. This could be simply wearing jewelry, performing medical procedures or magical rituals with his participation.
5. In situations where the stone turns pale, becomes heavier, or loses its shine and beauty, jewelry with it must be removed and left for a couple of days in a separate case, away from prying eyes.
6. If you do not want to lose the respect of your amulet, then try never to give it to anyone, even for a while. This is fraught with negative consequences after returning. The most harmless thing is that the stone will stop helping you in life. But there are times when a stone is “offended” and begins to take revenge on its owner. This can lead to the development of chronic diseases in a person, fatigue, constant bad mood, and apathy. Luck turns away from him, and problems begin at work.
7. Cleaning and charging the mineral must be done independently, in a good mood and with bright thoughts.

What you should pay attention to? For possible changes in the stone. It can change shade, become dull, “lifeless,” heavy, and being near it leads to irritability, nervousness, hot temper, and recklessness. This suggests that your talisman is very tired and simply needs to be cleansed of accumulated negativity. Give him the opportunity to rest and regain lost strength in order to support you in the future and lead you out of dead-end situations.

How to properly use a natural stone cleaner

First of all, you need to choose a product of the required consistency for convenient processing of the stone in a vertical or horizontal position - gel, paste, powder or concentrated liquid.

• The prepared product completely covers the surface of the stone. Apply the product in its pure form to the stains in a thick layer.
• The product is left on the stone for the time specified in the instructions.
• After the expiration date, the product is washed off with warm water under pressure or using a sponge.
• It is better to wipe products and surfaces made of natural stone with a soft sponge, cloth, suede or dust mop.
• If the surface is polished, after washing the stone must be thoroughly wiped dry to avoid streaks. In other cases (on paths, foundations, in a pool), the stone dries out gradually.

Basic cleaning rules

There are many ways to remove all the “dirt” from stones. But not every method is applicable for a certain category of minerals. For example, direct sunlight. An amazing way to clean gems. But you need to have information in which cases this should not be done. For example, amethyst, turquoise and rose quartz are afraid of the bright sun. Instead of being freed from negativity, they quickly lose their beauty, become faded and lifeless.

But there are other methods, for example herbs or other natural representatives, which are used for any natural minerals. But you need to be careful with sea salt and freezing. Salt can have a negative effect on the polishing of edges, and excessively low temperatures can lead to cracks and chips. Turquoise, malachite, pyrite, opal, carnelian, amber, onyx, lapis lazuli and other representatives of the world of stones are afraid of these methods.

Features when cleaning silver items with stones

The difficulty of cleaning silver with stones lies in the fact that the classical methods of care applied to the metal are often not suitable for the inserts that decorate it. Therefore, the method is selected based on the needs of the stone.

In order to clean silver jewelry, both chemical and mechanical cleaning methods are used, i.e. using abrasives, but the latter are absolutely not suitable for stones. The presence of even a small amount of fine abrasive can worsen the appearance of the main element of the decoration, and then a trip to the jewelry workshop cannot be avoided.

Jewelry with stones also react differently to dry cleaning. For some, alkali is not acceptable, others do not like acid and alcohol solutions, and some have a negative attitude towards high temperatures - for each case, an individual method of cleaning silver is selected.

Time to clean the gems

There is no need to create a schedule for cleaning your stones. This is of no use. The minerals themselves will let you know when it’s time to put them in order. The frequency of bringing talismans into proper condition depends on how often you wear it, what mood you are in, whether you have health problems, whether the work environment is favorable, how many envious people and ill-wishers you have, what goals you want to achieve and how many obstacles there are. must be overcome to achieve a positive result. In general, it all depends on the amount and complexity of the work.

Changes in the appearance and behavior of your amulet can be understood by the following signs:

• acquisition of dull or dark color, transparency changes;
• the aura changes and a peculiar haze with an unpleasant tint appears around the mineral;
• greasiness, stickiness appears, and heaviness is felt;
• the desire to wear jewelry with this stone disappears; it oppresses and repels with its presence;
• taking it in your hands, a feeling of dissatisfaction, aggressiveness appears, your mood deteriorates, and apathy arises;
• as soon as you put on jewelry, within a few minutes you begin to feel dizzy, your strength leaves, and your blood pressure drops sharply;
• In the process of wearing products, inconvenience and discomfort arise and you constantly want to get rid of this beauty.

If you never part with your jewelry, then you should cleanse it of negativity every seven days, and maybe even more often. This has to do with stones, which, like a sponge, absorb any energy, and there are plenty of them. It is worth keeping in mind that the closer the stones are located to the human body, the faster any “dirt” settles on them. This also applies to those gems that were used for medicinal purposes and for chakra balancing.

There is a basic rule that must be followed for any mineral purification, regardless of which method you choose: candle, salt, herbs, Moon, Sun and others. The cleansing time should fall on the remaining three days of the lunar month, immediately before the new moon. It is the full Moon that serves as a source of strong energy that restores the energy of the gem.

Features of caring for light and dark surfaces

White, cream, beige and light gray sinks quickly become stained with traces of tea, coffee, red wine and other colored liquids. After cleaning the sink with artificial stone, it is necessary to clean it from the bright colored surface as quickly as possible. A soft sponge soaked in warm or soapy water is suitable for short-term cleaning. Otherwise, dark spots or yellowing will appear that will require bleach to remove.

Black sinks are susceptible to the negative effects of water components, which is why white limescale stains appear on them. If a faucet leaks, rust or mildew will develop over time. It is advisable to use products that specifically combat rust and limescale stains. Otherwise, all-purpose cleaners will do, but they should not be in contact with the surface for long periods of time.

Methods for cleaning talismans

Everyone chooses their own method of cleaning their amulet. And there is nothing to invent here. As a rule, the cleaning technique is passed down from generation to generation along with the inheritance of amulets. You can, of course, experiment. It depends on the person and his inner conviction. But whatever method you choose, the main goal must be achieved - restoring the lost properties of the stone for its further use.

Using Moonlight

Most crystals are in harmony with Moonlight. But the most correct days for good cleaning are three days before and the same number after the Full Moon. It is during this period that the Moon’s energy is off the charts, and it is ready to share its wealth with the stones. Moreover, an abundance of clouds, heavy snowfall or heavy rain during the night will not become an obstacle to the exchange of energy force. The only limitation: if the cleansing takes place in an open space or with a window open, then snow and rain should not fall on the gems.

If the stone is heavily contaminated, before exposing it to Moonlight, you need to take a vessel, fill it with clean water, put salt in it and put the gem in it. Place this vessel on the windowsill and hold it for at least three days during the waning moon. When leaving, the Moon will take with it all the negativity accumulated in the stone.

There are stones that need to be cleansed exclusively with Moonlight. Other methods will not be effective. These include belomorite, labradorite, adularia.

Cleanse with the sun's rays

This is a wonderful way to help your gemstones cleanse themselves. Crystals with red, yellow, pink, orange tints are very fond of sunbathing. How to clean this way? It is enough to place the stones in open sunlight for 2-3 hours. It is best to choose an open space: a front garden, a forest clearing. But a window sill will also do. The only condition is the presence of good weather and bright sunshine throughout this period.

If the minerals were used to combat a serious illness, were in the hands of scoundrels, or were inherited from a deceased relative, then it is worth carrying out a deep cleaning. To do this, the gems are taken out into the open and left there for a week, or 10 days. The presence of sunlight is necessary, otherwise a positive result will not be achieved.

Good places to place crystals are on the branches of trees and shrubs or in close proximity to their root systems. Before using minerals for sunbathing, you should rinse them thoroughly under warm running water and then rinse with cold water. For some stones, a three-hour procedure is enough, even with the window closed. In cloudy weather, cleansing may not be possible.

Amethyst, aquamarine, green apophyllite, ametrine, turquoise, rose quartz, smoky quartz, prasiolite, opal, kunzite, citrine, fluorite, topaz are very fond of the Sun. But there are also those for whom prolonged exposure to the sun is contraindicated. This can lead to a change in their color and destruction of the structure.

The maximum exposure of stones to sunlight is as follows:

• citrine – 5 minutes;
• amethyst – quarter of an hour;
• aventurine - quarter of an hour;
• aquamarine – 5 minutes;
• lapis lazuli – 7 minutes;
• rose quartz – 65 minutes;
• sodalite – 8 minutes;
• fluorite – quarter of an hour;
• mother of pearl – 30 minutes.

What determines the purity of stones? The sufficiency of the procedure can be understood:

• by the appearance of smoothness and silkiness of the stone surface;
• it becomes pleasant in the hands;
• feels fresh and cool;
• the color is bright and rich;
• even in the absence of transparency of the mineral, the internal glow of a pure aura is visible;
• if you take the stone in your hands, your mood rises, your well-being improves, adversity and worries go away, strength and positive emotions are added;
• when wearing the mineral, a feeling of complete comfort appears;
• he exudes strength and power.

Clean with water

Another unique way to rid a stone of negativity is plain water. It is considered a means of purifying both the physical and energetic components of the mineral. Moreover, you can use both running water and water baths. But holy water or collected from a clean source is best. Experts in this field agreed that the most effective water would be river, sea or any other natural sources. It is considered alive because it is constantly in motion. Such water can not only perfectly cleanse minerals of negativity, but also recharge them with active energy.

If possible, you should put the mineral in a stream or river for a while. It is the water flow that washes away all negative information. But if this is not possible, then you should resort to a passive or active cleaning method. The passive method is as follows: take a small container, put a stone in it and place it under running water for 10 minutes. With the active method, the minerals must be held in your hands all the time while water flows over them. At the same time, you look at them, come into contact with them, which has a positive effect on their cleaning. You can even feel how all the dirt is washed away, the aura becomes clean, strength and energy are restored. But this procedure is longer and can take 5 – 7 minutes.

Basic rule: never wipe off minerals after a shower. They should dry on their own. For greater benefits, you should light a candle and place gems next to it. This will enhance the effectiveness of actions.

There are certain limitations to this procedure, since not all stones can be water cleaned. It is necessary to take into account their properties and characteristics. So, if minerals are able to dissolve in water or lose their qualities when interacting with it, then such an idea should be abandoned. As for citrine, he prefers to wash only under cold water. Rhodochrosite does not like water, so you should wash it no more than a couple of times within 10 days and with special care so as not to damage the polish.

It is necessary to avoid cleaning dioptase, fluorite, mother-of-pearl, malachite, lapis lazuli, chrysocolla, and sodalite with water. They may soon begin to deteriorate and become dull. When interacting with water, selenite can disappear before our eyes. It is strictly forbidden to spray stones with water after they have been in direct sunlight for a long time. This will lead to their tarnishing, splits, and cracks.

It is also worth finding another method of purification for halite, astrophyllite, heulandite, selenite, muscovite, kyanite, gypsum, seraphinite, uvarovite, stilbite, chermigite, celestite, chrysocolla, fuchsia slate. Water negatively affects their physical properties, completely dissolving them. Therefore, you need to choose salt, sun, moon, herbs and other means of purification for them.

It is worth giving up sea water for apophyllite, aquamarine, turquoise, belomorite, cachalong, calcite, labradorite, hematite, opal, onyx, rhodochrosite, rhodonite, pyrite, ulexite, amber, carnelian, eudialyte. The presence of salt in water can negatively affect their physical properties.

We use other crystals for cleaning

But not all stones are suitable for these purposes. To use this method, you must have:

• amethyst brush;
• selenite stick;
• carnelian crystals;
• quartz.

This method is quite simple. Contaminated stones should be placed nearby on the windowsill or in the same box with “cleaners” and left for a couple of hours. But the minerals that are used for cleaning, in turn, must be perfectly clean. Otherwise, a positive result will not be achieved.

Brown rice or sea salt

These are also effective methods, and using brown rice is preferable as it will not harm the surface minerals, unlike sea salt. The cleaning method is quite simple. You need to take a small container, pour sea salt or brown rice into it and “bury” the mineral in it, leaving it for 3 days. Once the cleaning is completed, the stones are washed under running water and left to dry naturally. It must be remembered that the repeated use of salt and rice must be avoided. After cleaning, all this is thrown away.

Sonic cleaning

This cleansing involves Tibetan or crystal singing bowls. It is the sounds of such objects that cause the vibrations of stones to be restored to their original state. These devices are able to free gems from other people’s negative energy and help them tune into a positive mood. In addition to singing bowls, you can use Tibetan drums or cymbals, bells, and tuning forks. If only the stones were exposed to a pleasant, soothing and cleansing sound.

Reiki session

This method will make it possible to recharge the crystals, cleanse them and provide them with additional energy. You don't need any equipment for this. You must have a good mood, a positive emotional attitude and a desire to cleanse your minerals of negativity.

We take the gems in our palms, mentally wish them to cleanse and recover, direct all our positive energy to them and blow on them three times, inhaling and exhaling deeply. This healing breath will have a beneficial effect on the crystals and help restore your energy to its original state. The main condition is the absence of strangers at this event.

Fumigation

For this method you will need herbs that are set on fire. They mainly prefer sage, lavender, cedar, sweet grass, bedstraw, and wormwood. All of them, or whatever you have, are dried, mixed and scorched to create smoke. Under no circumstances should you use a lighter, only matches. To create a light smoke screen, you can use a small sheet of cardboard, which is used to fan the smoldering herbs.

Then take the stone in your palms and hold it directly under the stream of smoke. The duration of the procedure depends on how dirty the stone has become. This could be a couple of minutes, or it could take up to half an hour. In this way, you can clean not only the stones, but also yourself, as well as the room in which you live.

Elixir

You can purchase it or make it yourself. To do this, you need carnelian, which is placed in crystal clear water and left for 15 days. It is best to pour the finished elixir into a spray bottle and treat all dirty stones with it. The main thing to remember is that stones that are afraid of water should not be subjected to this procedure.

Flower petals

You need to collect a whole bowl of petals from the flowers that you like or that bloom at this time of year. The gem is dropped into the bowl and left for several hours. The main thing is that the flowers grow in an open field or in an unpolluted area and are full of vitality before you pick them.

Earth

A flower pot in the house and a dacha plot of land are suitable for this. Place the crystal there and leave for 15 minutes. Afterwards, rinse it under warm running water and leave it to dry on the windowsill, after laying it on a soft cloth. The earth will absorb all the negativity, leaving only positive properties.

But carefully study the characteristics of the stones before using this method. The main thing is that after such cleaning, the minerals remain intact, with an intact coating and a bright shade.

Saline solutions

This method must be used with extreme caution so as not to further damage the stones. Aquamarine, calcite, labradorite, turquoise, belomorite, opal, onyx, malachite, carnelian, pyrite, amber and other gems are afraid of saline solution. Take a container, pour clean water and add salt to it at the rate of 2 tablespoons per liter of water. Then we put the stone in a saline solution and leave it for several hours or several days, depending on the amount of negativity absorbed. After the procedure, the stones are removed and washed well with warm running water. They dry on their own, without outside help.

Cleaning silver with mineral semi-precious stones

Silver is an excellent setting; precious and semi-precious stones are common (diamonds are an exception). Ruby, garnet, sapphire, aquamarine, turquoise, opal, moonstone - the list goes on. The methods for cleaning silver with these stones are different, since they differ in their physical properties - density, i.e. resistance to scratches.

Quick cleaning of garnet, topaz and ruby

Pomegranate

Topaz

Ruby
Although these precious stones are highly durable, it is not recommended to subject them to unnecessary stress, especially in hot water. Therefore, they are cleaned in the following way:

1. Pour a small amount of cool water (15–20 C°) into a glass or other small container.
2. A ring or earring is tied to a thread.
3. Rinse in water (5–10 min).
4. The stone is wiped with a cotton rag or soft sponge.

If contamination cannot be removed, then a small amount of glycerin can be used.

Careful care of turquoise, malachite and opal

Turquoise

Malachite

Opal

Earrings and rings with inserts made from these materials can be cleaned with slightly alkaline solutions. To do this proceed as follows:

1. Prepare an aqueous solution with soap or shampoo: 5 ml of detergent per 100 ml of water.
2. Soak the product in soapy water for about 10 minutes.
3. Rinse with clean water.

Cleaning with ammonia is also allowed:

• A cotton swab is moistened with ammonia.
• They wipe the pebble.
• Rinse with clean water.
• Wipe with a soft cotton cloth.

Cleaning silver at home

Effectively combats stains on emeralds, aquamarines and sapphires

Emerald

Aquamarine

Sapphire

The Mohs hardness of these stones is more than 7, which means that fine-grained abrasives can be used for cleaning.

1. Tooth powder or paste is mixed with water. To reduce the risk of damaging the polishing of stones, kerosene is used instead of water.
2. For a ring, brooch, etc. Apply the resulting paste and rub it with a soft-bristled toothbrush.
3. The cleaning agent is washed off with warm water.
4. Wipe with a soft cloth.

Charging stones

Once the minerals are cleared, they need to be charged. For this, moonlight or sunlight is used. Your assistants should rest a little and regain strength for future work. Crystals are left on a windowsill or in a garden, in a forest clearing or on the bank of a river for a short time. The main thing is that there is silence, the absence of prying human eyes and good sunny weather during the day or bright moonlight at night.

You should not immediately use a cleaned and charged stone. Give him a couple of days of rest. And then wear it as a talisman or talisman. And you will immediately feel a surge of strength and energy in him, your affairs will improve, your health will return to normal, your mood will improve.

Recommendations for using stone sanitary ware

Various rocks are used to make natural sinks and basins, such as granite, marble, basalt, sandstone and others. In addition to a variety of natural shades and patterns, these materials are durable, resistant to moisture and chemicals. Minor difficulties with cleaning arise when choosing a stone with increased porosity.

They contain 70% detailed natural material combined with synthetic resins, adhesives and dyes. In homes, you can most often find sinks made of granite or quartz, the composite of which is resistant to mechanical damage and contamination.

To extend the life of your stone sink, you should follow the recommendations:

• avoid exposure to too high or low temperatures (liquid, surfaces of vessels), contrasting differences in hot and cold water;
• Do not throw hard, sharp objects into the sink to avoid scratches or scratches;
• do not use aggressive chemicals for cleaning;
• when using household chemicals, choose formulations intended for composite materials;
• If you are not using sanitary products, leave them dry and free of dirt, cleaning agents and grease.

Timely and proper cleaning will prevent the appearance of persistent stains or mildew.

Let's summarize

If your marble finish has started to lose color, is slightly scratched and needs etching, you can restore the shine by using special marble cleaning products. The process is usually re-crystallization, which returns the stone to its original shine and shine. I hope you understand how to clean natural stones! And it is best to lay tiles using special tools called a tile leveling system. Using them, you will get the job done very quickly, and most importantly, efficiently!

Folk remedies

You can wash your stone sink and remove most of the dirt with a soft cloth and one of the following methods:

• Lemon acid. The powder contains abrasives, so lemons cut into pieces are used. A separate slice or squeezed juice removes yellowed and rusty ones.
• Soda. Preparing the pulp is required to avoid scratching the shell. The composition does not rub in and is applied to dark spots, lime, traces of rust, washed off after 10.
• Mustard powder. The crumbly composition or paste is applied to a damp sponge, spread over the surface for several minutes, and then washed off.
• Carbonated drinks (Sprite). The heated drink removes limescale, rust and colored stains.
• Toothpaste in the form of a gel. It is used for cleaning and bleaching sinks.

The right products can be very effective, but don't rush to apply them over the entire surface. If possible, start by testing on a small, hidden surface.

Important: Do not use vinegar to clean marble.