What should you know about resizing your ring? Titanium rings versus white gold.

Is it possible to enlarge a wedding ring and how to do it?

An engagement ring is usually purchased once and forever. And what a disappointment the girls are when the decoration becomes small. You have to either take it off or wear the wedding ring around your neck on a chain. For some reason, few people turn to master jewelers to change the size of their wedding jewelry. Although this is not only possible, but also necessary if you want to continue wearing your most cherished jewelry, despite the circumstances. The Svadebka.ws portal team will tell you whether it is possible to enlarge a wedding ring, how and why this can be done.

What to do if your engagement ring gets too big

There are several simple ways to solve this problem. You can wear the jewelry on the middle finger , as it is slightly thicker than the ring finger. This option is quite acceptable for most women and men.

Some people prefer to wear a wedding ring on a chain around their neck, but usually this decision does not suit the woman. After all, then it turns into an ordinary decoration and no longer acts as a symbol of your marriage. In addition, there is an opinion that widows wear the rings of their husbands around their necks.

If the ring is too large, you can contact a jeweler, for whom making it smaller is a common practice. This option is suitable only for simple models made without engravings or decorations. You can resort to it only if you are absolutely sure that you will not gain weight anymore and there is no need to increase the size of the product. This service costs approximately 500 rubles.

The most drastic method of solving the problem is to melt down the product and order a new one of a smaller size.

Don't know which hand people wear wedding rings on? In this article we answered your question!

After painting, the bride may have a desire or need to return her wedding dress. Where this can be done, under what conditions and how much you can earn this way - these questions are answered in another article on the site.

Before returning your outfit, you need to steam your wedding dress. We have shared useful tips in another article. She will help you do this at home using steam, a steamer and other methods. To avoid getting yourself into trouble, before making a transaction, it is important to find out whether the wedding dress can be sold. Here we talk about all the pros and cons.

In what cases is a wedding ring enlarged?

Enlargement of a wedding ring from a specialist is most often ordered by people who:

• gained weight - as you gain weight, the size of your fingers increases, so the decoration becomes small;
• fell ill - with diseases such as arthritis or arthrosis, the shape of the fingers changes, the joints enlarge, and the ring becomes impossible to remove or put on; but with these pathologies it is better not to wear any jewelry on your hands at all;
• received a ring by inheritance - your parent or grandparent’s size may be smaller than yours, and so that the ancient jewelry does not disappear, you can increase it.

In such cases, increasing the size of the wedding ring will allow you to continue wearing it in its intended place - the ring finger. After an experienced craftsman has worked on your wedding jewelry, it will fit you perfectly.

Which wedding rings can be enlarged and which cannot?

Before enlarging your wedding ring, you should find out in advance whether it can be resized at all: this depends on the model and other characteristics of the jewelry.

Material and design of jewelry

The material of the wedding ring is the first important point to pay attention to. And if the question is: “How to increase the size of a gold or silver wedding ring?” is easily solved, problems may arise with platinum or rhodium. These metals are very hard, so special equipment is needed to process them. If your ring is made from these expensive metals, then look for a craftsman who specializes in platinum and rhodium.

The second type of wedding rings, which practically cannot be enlarged, is jewelry with an openwork airy pattern. When rolled out, the ornament is deformed, and when inserted, its integrity is compromised. When boring, the pattern becomes thinner, and the metal in these places may subsequently simply crack or bend.

The third type of finger jewelry can be increased, but you need to be especially careful with them. These are headbands with large stones. For example, diamond wedding rings can easily be damaged by heat or deformation during cutting and insertion, if the bezel is too far apart and this changes the shape of the stone mount.

Separately, it is worth considering rings with small stones in a circle: such wedding bands can only be increased by 1 size by boring them. We'll talk more about this method a little later.

Drawings and inscriptions

And finally, we’ll tell you about rings with an engraving or textured surface. Wherever the decor is placed (outside or inside the tire), no matter what enlargement method is used, the pattern will be damaged. If the original engraving is not so important to you, you can remove it and then reapply it.

An ideal option for wedding jewelry that can be quickly and easily expanded is classic smooth rings made of gold or its alloys. You can also work with silver jewelry of the same design, however, after enlargement, the metal may turn black. If the silver has been gold-plated or otherwise treated, the plating may be damaged. In the first case, the decoration is easy to clean, in the second, it is sprayed again.

The ring is big! How to reduce it at home?

Girls, this is a question. I was given a ring as a gift, and it turned out to be too big (by 1 size). How can I reduce it without taking it to a workshop? The problem is that it has a rotating insert, and the workshop said that such rings cannot be changed. Moreover, there is still a pattern there, and it can go astray. In general, I'm thinking of putting something under it. Of course, I’ve heard about silicone linings for rings, but it’s impossible to find them anywhere here. What can you recommend?

On ebay, they are called ring sizer.

wrap with a plaster matching the color of the skin on the side of the palm, a regular plaster with which wounds are sealed

You can make many layers with colorless varnish and the size will decrease

New features and design have appeared for the version of the Woman.ru Forum on computers. Tell us, what are your impressions of the changes?

On ebay, they are called ring sizer.

I just introduced a ring sizer on ebay, it gives out iron things with a bunch of rings that jewelers have, which are not silicone at all ((((

with rotating the insert in the workshop is reduced, it simply will not rotate or with great difficulty. They did the same for my husband’s wedding ring, although they made it bigger, not smaller.

Cover the inside of the ring with a plaster, it works, it’s been tested.

On ebay, they are called ring sizer.

I just introduced a ring sizer on ebay, it gives out iron things with a bunch of rings that jewelers have, which are not silicone at all ((((

Try ring snuggies and ring adjusters sizers.

wrap with a plaster matching the color of the skin on the side of the palm, a regular plaster with which wounds are sealed

Will this not spoil the gold? I would like to be able to wash my hands in a ring too.

Cover the inside of the ring with a plaster, it works, it’s been tested.

Doesn't it come off under water?

with rotating the insert in the workshop is reduced, it simply will not rotate or with great difficulty. They did the same for my husband’s wedding ring, although they made it bigger, not smaller.

So that’s exactly what is only increasing. And if you reduce it, suddenly the insert will fly out altogether.

On ebay, they are called ring sizer.

I just introduced a ring sizer on ebay, it gives out iron things with a bunch of rings that jewelers have, which are not silicone at all ((((

Try ring snuggies and ring adjusters sizers.

How to increase the size of a wedding ring?

So, we have already found out that almost any wedding ring can be enlarged. The main thing is to have a trusted craftsman resize your wedding jewelry. But whether it is possible to do this yourself is a difficult question. Let's look at it in more detail.

How to enlarge a wedding ring at home?

To do this important job yourself, you need the “stars to align”: your ring must be classic (smooth and gold), and you can “get” a metal cone that matches the new size of your finger. What we do next:

• wraps the cone in foil so as not to scratch the decoration;
• heat the ring and put it on the cone;
• Gently tap the decoration with a hammer, moving it downwards towards the expanding part of the cone.

Before enlarging your engagement ring, make sure you have the skills to do it at home. It’s better not to take risks (especially if the ring is very expensive to you) and give the jewelry to an experienced craftsman.

How do jewelers enlarge engagement rings?

If you are interested in how professionals enlarge wedding rings, we will tell you about the most common methods. Changing the size of a wedding decoration is carried out in the following ways:

1. Insertion is a rather complex and expensive option. The shank of the ring is sawn and pulled apart, and a piece of metal is inserted into the resulting space. The material must be identical; its cost is usually included in the price for the service.
3. Boring - suitable only for rings with a thick shank (not wide, but with a thicker wall), allows you to increase the decoration by a maximum of 1 size. A layer of material is ground off from the inside, while the weight of the ring becomes less, and part of the metal simply turns into dust.
5. Stretching is the simplest and cheapest method, which is performed according to the same principle as we described above: a metal cone, heating, tapping, then cleaning and polishing.

Determine the correct size

Of course, the best thing when buying such an expensive gift is to know the exact size, or even better, buy it in the presence of the lady of your heart. In this case, you need to keep in mind that your fingers may swell in the morning, especially in hot weather. It can also occur after exercise, as well as at elevated temperatures during illness.

Important! The thickness of the fingers on the left and right hands is different.

If you don’t know the exact size, you can calculate it using simple methods at home:

• A strip 1 cm wide is inserted inside the product. A mark is made with a pencil in the place where one of the edges ends. The length of the marked strip is measured with a ruler. The resulting number is divided by 3.14 - this will be the size of the jewelry.
• The most accurate way at home is to measure the internal diameter with a caliper, but not everyone has one.
• You can measure using coins, if you have them: 1 ruble - size 21, 50 kopecks - size 19.5, 5 kopecks - 19, 10 kopecks - 18, 1 kopeck - size 16.
• The simplest, but not the most accurate, is to measure the size of the ring with a ruler, and you need to take the inner diameter.

Why do you have to resize your ring?

Throughout life, the human body changes. It rarely happens that there have been no changes in your figure over the years, so almost everyone faces the question of the need to change the size of their jewelry. The most common reasons may be:

• changes in body weight, weight loss or weight gain, affect the size of the fingers;
• a family jewel inherited from a close relative;
• a gift from someone who doesn't know the exact size.

It is uncomfortable to wear a ring that is the wrong size. Even if you manage to put it on your finger, it will either press or try to fly off. Therefore, if you like the decoration, it is better to increase it according to your size. In most cases, this is a simple and affordable procedure.

How to reduce your ring size

Cutting out a piece of shank

Most often, the procedure is performed on rings with stones, where it is important not to damage the overall structure. To reduce the ring by one size, a piece of shank about 3.14 mm long is cut out, and the joint is ground and polished well.

Shredding the ring

The ring is put on the bolt, and then the metal is heated and knocked down. This method is recommended for adjusting the size of simple rings without stones or decorative elements. This is how classic wedding rings are customized. If the ring needs to be reduced by only half a size, the ring is not heated, but simply knocked down. If it’s a size or two, the metal is heated gradually and knocked down to the required parameters.

Insertion without sawing

An additional plate of the appropriate metal or another additional ring is inserted into the inner part of the ring. This is one of the most expensive correction methods, but the impact on the ring is minimal - only its internal diameter changes.

Enlarge a ring at home: an effective way

In some cases, it is possible to enlarge the ring on your own. There is a way to solve the problem at home, which includes several steps:

1. Select a metal cone that matches your finger size.
2. Wrap the cone in foil to protect the jewelry from damage and scratches.
3. Heat the ring and put it on the cone.
4. Gently tap the product, expanding to the desired measurement.

The process is labor-intensive and must be performed carefully so as not to damage the ring. Therefore, it is not advisable to increase the size of the “engagement ring” at home.

How can a master jeweler enlarge a wedding ring?

In order not to take risks and not worry about the safety of valuable jewelry, it is better to take the product to a jeweler. This will guarantee that the process of increasing the size will take place quickly and efficiently, and the expensive jewelry will not lose its pristine beauty.

Jewelers use several methods to increase the size of a wedding ring:

1. Stretching. This is the simplest and most inexpensive option. It consists of using a special metal cone onto which a ring is placed after annealing. The device is gently rotated, which causes the jewelry to stretch. Once the desired size is achieved, all that remains is to rinse and polish the product.
2. Insert. If you choose this method, the ring will have to be sharpened with a small amount of metal. The craftsman cuts the shank and polishes the product with the required amount of gold or silver.

The method is not suitable for rings with a wide rim and for products with openwork inserts and large stones.

3. Insert. If you choose this method, the ring will have to be sharpened with a small amount of metal. The craftsman cuts the shank and polishes the product with the required amount of gold or silver.

It is important to choose the sample and color of the precious metal correctly so that no differences in color or seams are visible on the finished product. The method is expensive, since the price includes not only the work, but also the cost of the material being ground. Professional work will allow you to maintain the ideal appearance of the product even with a significant expansion of the ring.

4. Boring. This method involves removing a small amount of metal from inside the rim of the jewelry. Boring will allow you to increase the size without external changes to the product. This method is only suitable when you need to expand the rim quite a bit.

Depending on the problem and type of ring, the jeweler will select the ideal option for enlarging the product.

How to enlarge a ring in a jewelry workshop

There are also three ways to increase the size of a ring in modern jewelry. Be sure to check with a specialist which one he will choose so that you can control his work.

Metal insert

This method is similar to cutting (if it is necessary to reduce the size), but exactly the opposite. The jeweler will check your jewelry and look for any cracks or scratches. Then, if everything is in order, the master will cut the shank in the same way, but will not throw away part of the metal, but, on the contrary, will insert a previously prepared part. Here it is very important to choose the sample and shade of the insert so that it looks organically on the bored ring. After final processing, grinding and polishing there should be no seams or differences in color on the product.

Mechanical stretch

The simplest and most common option. If you have an ordinary metal ring that does not have openwork elements or precious stones (as a rule, we are talking about wedding rings and men's signets), then the master will easily stretch it by 1-2 sizes, and in some cases - by 3. This This method is not suitable for wide rings: the thinner the rim, the easier it is to stretch it. If the width of the ring exceeds 1 cm, it is better to abandon this option. The process itself is simple.

1. The master calculates how many millimeters the ring needs to be stretched;
2. The jewelry is annealed and placed on a polished cone, which jewelers call a crossbar. Rotation of the device leads to an increase in the size of the product.
3. The final stage is “cleaning the feathers”: the jewelry is washed, irregularities are removed, sanded and polished.

Boring

This method can be called simple, but radical. It is only suitable if you need to enlarge the ring only slightly (up to 0.5 mm), and the product itself is quite thick. The master will remove a little metal from the inside of the ring so that you will not observe external changes, but the jewelry will fit normally on your finger. True, like insertion, this not very popular method of increasing the size may be the only one possible if the decoration is ornate in shape or inlaid with stones. Unfortunately, boring a ring results in the loss of ground material, most often gold. But if there is no other choice, then boring the ring is better than putting it away.

Questions for the master

In order to be confident in the result of the jeweler’s work, before giving him the ring, it would be a good idea to ask a few questions. You will show yourself to be a competent and responsible client. And depending on the master’s answers, you will understand whether he is worth trusting.

• Find out what the technology is for carrying out the work.
• Assess the risks.
• Check to see if the work will be guaranteed.
• Find out what awaits you if the craftsman fails (cracked stone, obvious seam in the metal...), how the loss will be compensated.
• And the last thing is not the most obvious. If the ring is being reduced, ask whether the “remaining” ring will be returned to you.

Of course, it is optimal to buy a ring that fits your size. But even careful fitting will not save you from the possible need to reduce or enlarge your favorite piece of jewelry. You should not treat this as a problem: in most cases, the professionalism of jewelers will allow you to cope with the situation in an hour or two. And you will again enjoy your favorite ring on your finger, and not in an old box.

Which rings cannot be enlarged?

The problem of small ring size is not always solved. Some jewelry will still have to be put aside until you lose weight or passed on to the younger generation. Cannot enlarge:

• costume jewelry, because jewelers do not risk working with alloys whose composition is unknown. It is not clear how this or that metal will behave when heated and mechanically affected.
• rings with engraving, under the influence the inscription will deteriorate and lose its beauty.
• openwork rings, because patterns may “float”, which certainly will not make the product better.

Difficulties arise with platinum rings and jewelry with stones. Platinum is a very demanding metal that requires special equipment.

Working with stones requires special attention. They do not always retain their ideal appearance when heated, so they are removed before work. For products with scattered minerals, it is better to use the expansion method by insertion. In any case, the work is carried out carefully and exclusively by professionals who have the necessary equipment and are familiar with the specifics.

Is it possible to resize a titanium ring?

It is true that a titanium ring is more difficult to change compared to rings made of other metals such as gold or silver. Titanium is a very strong metal and its hardness makes it very difficult to work with, but sometimes resizing may be doable.

Some jewelers will say that they cannot change the parameters of a titanium ring. Others will say that change is possible, but with limitations.

There are jewelers who say that they can only increase the size of a titanium ring, but not reduce it; others claim that they will also be able to reduce your decoration.

The bottom line is this: whether a jeweler will be able to change the parameters of a titanium ring depends on the technology he chooses to use.

If you are determined enough, you may find someone who will be able to help you. However, such a service will be expensive.

Expanding a Wedding Ring: Risks

Modern jewelry workshops can solve the problem of increasing the size of a ring in just an hour or two. Most often, problems do not arise, but their risk cannot be excluded. The worst thing that can happen to jewelry during expansion is:

1. Change in metal color. This can occur when rings made of alloys and coated silver are enlarged. If a silver product can be restored to its former appearance with proper processing, then costume jewelry behaves unpredictably.

2. Tarnishing of the stone. This can happen when heated. To avoid this, you can remove the stone from the ring before working or try not to heat it.

3. Imperfect shape. Enlarging a ring “in a hurry” can lead to the fact that the finger will end up with not a round ring, but an oval-shaped product.

Signs associated with increasing the size of a wedding ring

Wedding rings are a symbol of love and fidelity, a kind of amulet of a family idyll. There are a large number of beliefs and signs about the accessory. One of them predicts disaster in the event of breakage or damage to jewelry. And this makes me think: is it possible to enlarge a wedding ring, especially by insertion?

Remember, if the engagement ring is too small for you, you should not consider this a problem. Because there are always professional jewelers who will solve this problem in an hour or two. And you will again be able to wear your favorite piece of jewelry, rather than storing it in a home box. Wear symbols of eternal love and be loved!

Choose a product at the best price

Pick up

Source

What to do if the ring is large: several exits

Don’t want to part with your wedding ring, which has become too big and dangles unattractively on your finger? Are you afraid of losing him? We will tell you how to solve this problem! You will learn what can be done to reduce the size of a product, who will help with this, and how much such a service costs. Here you will read about different ways to wear a large ring that will prevent it from falling off. We will answer the questions: what can you wear it with, on which finger, and whether you should downsize.

Six ways to resize your ring

To change the size or not to change - that is the question!
If you have a beautiful product with stones, but the base is jewelry steel, then in 99% of cases the jeweler will refuse to do the work to change the size. The reason is that it is not clear what kind of metal alloy is inside the ring. The risk is that it is not clear how the alloy will behave inside the product; irreversible deformations and stones falling out of the setting are possible.

The jeweler's work involves only items made of gold and silver.

If the size you want to change differs insignificantly from a quarter size in one direction or another, then it is likely that you should not change the ring size. The jeweler will definitely tell you that any manipulations with the product, even in the coolest workshops, do not improve the quality of the jewelry.

If you are looking at a ring, you really like it, but the size is not suitable, you should refuse to buy it, because a product with stones larger than 0.3 ct, subject to alterations, has a high risk of losing stones.

Another point worth paying attention to is the significant change in ring sizes - from 1.5 sizes.

It is unlikely that an adequate jeweler will undertake such work, because it is simply suicide. It is impossible to do this without losing the quality of the product.

Reducing the ring - safe ways

Method 1. Cutting out a piece of metal and then soldering it.

It is recommended to reduce the ring no more than 1 size (3.14 mm).

Taken from https://zlato.ua/ru/persten_30/

Method 2: Compressing the ring.

Only suitable for wedding rings without stones, without diamond facets, most ordinary wedding rings without enamel. Compression is carried out for 30 minutes and costs 300 -500 rubles

Method 3: Making the ring smaller by adding metal inside the ring.

The outer surface of the ring does not change, but a thin additional ring or plate is fused inside, which reduces the inner diameter of the ring. This method is suitable for products with stones, because there will be no deformation or loosening of the fastenings.

The price is much higher, the work itself starts from 800 rubles plus the cost of additional metal.

Enlarging the ring - how to do it correctly?

Method 4. Rolling out.

A method of increasing the ring while decreasing the thickness. The base of the ring is the shank, and if it is thick, then when rolled out it becomes thinner and the ring increases in size. The work is carried out within 30 minutes, ideal for wedding rings.

Method 5. Inserting metal into a product.

The base of the ring is cut at the bottom, the ring is expanded to the required magnification size, then metal of the same sample, color and shape is placed. Final soldering is performed with a laser. If the jeweler does a good job, the sealed element is almost invisible, and the cost of the work starts from 600 rubles plus metal.

Method 6. Boring.

The metal inside the ring is ground off. The method is suitable for products with stones and thick shanks. The advantage is that the metal inside grinds off a little, but the outside remains unchanged. The work is quite delicate, it takes from 1 hour, there are restrictions on the changeable size - no more than 1 size.

Dangerous moments!!! What you should pay attention to

If the rings contain enamel

, then most jewelers will refuse. The enamel may become deformed or even “float.”

Silver ring with gilding and enamel.

If there are diamonds or other precious stones

, you definitely need to look at the setting. If the setting is almost weightless with two or one claw, with the tenon of the stone lightly touching the metal, then the jeweler will refuse to change the size, or will offer to remove the stones, then change the size and then put the stones in place, which will significantly increase the cost. In any case, the setting may begin to deform, so everything is individual.

An example of weak setting of emeralds in a product. Resizing is not possible. Taken from www.valtera.ru

Rings with several types of gold.

Enlargement of such rings is possible in exceptional cases, because different gold has different impurities in its composition and different ductility.

Did you like the article? Subscribe!

You may also be interested in these topics:

Determining the value of family jewelry

How to choose the best sapphire in a jewelry store, 5 tips from a gemologist

Cleaning diamonds in 5 minutes

Source

When can a ring not be changed?

There is a limit to how much a ring can be resized.

If the desired increase or decrease is more than one or two sizes, it is unlikely that the change will be possible without risking damage to the ring.

Some metals are difficult to change. For example, most jewelers cannot alter titanium rings because conventional cutting and soldering does not work with this metal.

Other methods such as drawing, cutting or adding additional material can be used, but their effectiveness has its limits.

If your jewelry contains gemstones, they must be removed before resizing the ring. However, if the stones are not set using traditional prongs, it may not be possible to remove them without damaging the ring.

In such cases, unless the stone is a diamond or other heat-sensitive gemstone, resizing may not be possible because the high temperature required for soldering will damage the stone. This is the case with rings made from platinum, sterling silver and palladium.

So make sure your ring fits you as best as possible before you buy it because adjusting its size later can be a hassle and may even be impossible.

How to increase the size of a wedding ring?

Wedding rings are an important wedding attribute for newlyweds. The girth of the ring finger changes throughout life, because a person can lose weight or gain weight. The portal www.svadbagolik.ru will tell you about various ways to change the size of a wedding ring yourself at home, as well as which jewelry can be enlarged, and for which such a procedure will have disastrous consequences.

Enlargement of a wedding ring: in what cases should it be done?

Sometimes the owner of a wedding ring changes in build after the wedding. As soon as you lose a little weight or gain weight, the jewelry no longer fits your size. Cases when enlarging a wedding ring is necessary:

1. If, under some conditions, the future wife or husband could not be present when purchasing the jewelry, and it was purchased without their participation;
2. The wedding ring is a family heirloom and is not the right size for the new bride or groom;
3. If the spouses’ physical shape has changed after several years of marriage, and the size of the jewelry has become completely inappropriate;
4. If, with swelling of the hands, the product strongly compresses the finger and causes improper blood circulation;
5. The ring was purchased from an online store, and the appropriate size was determined by eye.

Big wedding

What to do if the engagement ring is too big? Yes, sometimes that happens. That is, it happens that the ring purchased for a wedding does not fit in size. There is a sign that if the engagement party turns out to be big, then love and happiness go away with it. But still, don't be upset. Since everything can be fixed, it is worth taking action quickly. You can move the decoration to the middle finger, it is thicker than the ring finger. This option is suitable for women and men. Perhaps just hang the ring on a chain and wear it around your neck. But this option is not suitable for everyone. Since many people prefer to wear it on the ring finger. If you put a ring on your other finger, other people will not perceive it. They will assume that you are not married and may constantly ask questions on this topic. The best thing to do would be to contact a jeweler. He will measure everything and adjust the ring to the desired size, and you will be satisfied with the result. The price is not too expensive, and anyone who has encountered this problem can afford it.